If you mix a snowboard and a skateboard, you get a sticker. California, this mother in love with innovative sports, is also the land of ripstik. It was invented in 2006, but the honour goes to Ripstik, the brand that really helped it move forward, put it on the market and made it a household name. Gypsum for bandages and cracks for dry construction walls.
You want to know how to drive a Riptick? Well, let’s see.
How can I operate the Ripper? – 7 Simple steps
Correct safety mechanism
- Nice regular helmet, not from the dollar show. Your helmet must have chin straps so it doesn’t move.
- Kneecaps and elbow pads. Velcro must be fastened.
- Decent, sturdy shoes with solid, preferably flat rubber soles. Do not use sandals or slippers.
Watch your Ripper.
Signs are known under different names: Casting Board, Cheerleading Board and Wave Board. They look a lot like snowboarders. It is a kind of skateboard with two different boards connected by a turning circle. They contain 360-degree trucks and with this degree of freedom of movement they can be used one after the other without any problems. The driving experience is quite unique. You also get an electric ripstick and a mini ripstick that weighs much less. They call him The Ripper.
Okay, we’re done. We need a gentle slope, a smooth and even surface. He must have grass on one side, both for training and in case of a fall. Conversion is not a prerequisite, but it will facilitate the process. Don’t go for the steep hill, that’s not what we want. Okay, we’re ready to start.
Correct rudder shaft adjustment.
Place your chest on the ground with the tip of your nose pointing in the direction of travel. Your natural leg is the one that comes from behind to be more stable. Your natural leg is the one with which you instinctively hit the ball. Driving with your left foot in front of the steering wheel is called normal driving, and when the dominant or natural foot is in front of the steering wheel, it is called stupid driving.
Find your toes perpendicular to character.
Now place your front leg on the board perpendicular to the axis of the board. They have to even the score for the return match. It would be nice if you asked a friend to help you at this point. Hold his shoulder and put the other foot on his tail. If your friend is not available, there are many walls, slopes, everything you can hold on to while keeping your balance. Your legs should feel safe. Now press lightly on the dominant hind leg and put it back on the board immediately. Newton’s second law of motion states that equilibrium is proportional to speed, so a strong equilibrium requires a certain speed. Now you can say goodbye to your friend.
Move your legs forward and backward
That way you can speed up the pace. The excursion legs have to move back and forth. The ends of the bank will move in opposite directions and this will help the bank move forward. Slowly increase the intensity of body movements, including those of the hip joints. Go forward until you’re comfortable and ready to take turns. Just tilt your body in the direction you want to turn. The stick on your toes turns one way and the stick on your toes turns the other way. Remember that the legs must be properly aligned with the nose and tail. Otherwise you can’t increase the speed or do it one by one. Once you’ve gained momentum, just lean in the direction you want to go. No more kicking and punching.
Hold the rib bolt.
If you have to stop, just jump on a board or hold on to a piece of grass, which is safer.
- How to drive in the mountains
What is the comfort level when driving with Riptick? The first thing you have to do is determine the comfort level of an adult. Once you’ve gained enough experience, you’ll have the necessary momentum and start working with her permanently.
- Which part of the front?
One end is pointed, the other is swollen. The pointed end is the front. If in doubt, put the pointed tip on first and push it inside. He will travel honestly and directly. The light end towards the front allows the board to fly all around.
- What should my position on the slope be?
She dictates silence. If it’s a steep hill, you don’t want to accelerate, so just stand up straight. If it’s a flat hill, you can move a little to maintain your speed. Be careful when crossing the hills.
- Studying sticks is difficult. Why?
I wouldn’t say hard, a little hard, yeah. This has to do with the need to keep the balance and act in the right order. Once you have it, you know it’s pretty easy.
- How to travel on a Riptic?
Just move your legs and frogs. To get excited quickly, you have to make the movement less pronounced. If you increase your speed, you lose accuracy.
- How do I check my account balance?
Start and turn around until you lose all your strength and fall. Do it again, but this time with a big gust of wind, and learn to move with the movement.
- How to prevent collisions with items in
Keep an eye on yourself. Start slowly, and you can also start to increase the tempo as you get better.
- How do you proceed?
Lift your front leg, let it run, and if you balance your speed, it will be easier. At the same time they start to rotate in a snake-like pattern, which causes the speed of cracking.
- Can I ride on gravel?
No, that’s a bad idea. Whether you drive the Ripper or the Ripper, the gravel will make you stop.
- General excursions
- Replace the wheels about every 3 months.
- Avoid roads with traffic and pedestrians. An empty parking space or a free parking space is preferred.
- Avoid slopes and steep hills in the beginning. The speed control can be an indicator. You can try another practice.
Ripstick can be a lot of fun without big bumps and bumps. It’s a little harder to control, but you should be a fan of it. If you’re at least half decent, I assure you you’ll be happy.